Hot Setting Stenter Machine
The stenter are adopt with the latest environmental friendly inner chamber design, which can help to achieve a great drying and heat setting result.
Hot setting stenter machine
Application:
The stenter are adopt with the latest environmental friendly inner chamber design, which can help to achieve a great drying and heat setting result.
Machine parameter：
Machine name | Hot setting stenter machine |
Main application | Knitting or woven fabric |
Heat source | Natural gas . Thermal oil .high pressure steam |
Machine type | Hot air circulating |
Holding type | Pin+Clip |
Chain type | Pitch 60mm ,Oil -free lubricated |
Working type | Horizontal return chain |
Working width | 1000-2800mm |
Working speed | 5-100m/min |
Working chamber | 2.3.4.5.6.7.8.10（ for optional） |
Insulating board thickness | 150mm |
Temperature of chamber | 100-220C |
Pinning &Brush overfeeding ratio | -20%-40% |
Equipment Details | Single padder /Schneider component+Siemens motor/ PLC touch screen /Inverter /Italy Gas burner |
Steam consumption | 100-150kg/h |
Compressed air | 0.35-0.6Mpa |
Machine dimension | 48300*4620*1750 ( 10 chambers) |
Standard machine power supply | 380V/3P/50HZ |
Machine drawing :
Machine features :
● Left and right chain have individual motor with inverter speed control. Individual air nozzles with more efficiency and energy saving result.
Air nozzle are easily installing, which easy for dust remove and maintenance Different kinds of nozzles can be used for different kinds of fabric finishing. Special designed chamber and service door are easily for maintenance. Up and down air flow can be adjusted.
● Fabric entry for different fabric with different model as below :
● Padder
Maximum output pressure is 10 tons ,Rubber wheel can be placed inclined or horizontal ,It has liquid adding ,Water and dye liquor extrusion functions ,Achieves the right eveness of padder liquid ,Low residual shrinkage .Liquid tank pneumatic lifting and dumping ,Rapidly discharges .
● Overfeeding :
Wild range overfeeding adjustment range (-50%+100% ) between upper overfeed wheel and pins ,Meets the requirements of various fabrics
Left and right side pinning overfeed rate can be set a requested range individually .
Air compressed selvage expanding device ensures fully expanded selvedge before pinning
The tension of right and left can be individual adjusted
Selvedge uncurler driven with uncurler pins Selvedge uncurler with air blower
● Nozzles system
● Stenter chamber :
The whole chamber is made from 150mm thickness high density insulation material minimized heat loss .
The hot air circulation filter draw out for cleaning ,easy maintain and improve efficiency of hot air circulation
High efficiency and energy -saving design ,Matched with multiple air nozzle selections meets various fabric requests.
Wind curtain shielding device installs at the entry and exit openning
All drive units are placed outside the chamber for simple maintenance
There is no lubrication site inside the chamber so as to avoid all kind of troubles caused by lack of lubrication management
Selvage gluing
Large capacity stainless steel gluing tank ,Reduced the workload of the operator easy to add glue and mix it
Side wheel position device ,Convenient to quick adjustment of side wheel working position
The unique design of side wheel working surface avoid glue splashing glued selvage irregularity .
Selvage trimming
When the outer edge of sizing fabric is removed at the exit ,The lower wheel and blade are designed to be vertical ,So the edge can be trimmed at the end and the loss can be minimized .
Fabric exit model :
Hot Tags: hot setting stenter machine, suppliers, manufacturers, factory, customized, price, cheap, for sale, company, cost, for sale
Send Inquiry
