Hot Air Stenter Machine
Hot air stenter machine is used for heat setting process of the open width fabrics. After worked by the machine,fabrics will get stable size.
Hot air stenter machine
Machine usage:
Hot air stenter machine is used for heat setting process of the open width fabrics. After worked by the machine,fabrics will get stable size.
Stenter Flow Procedure :
Flat feed cloth →High position guide cloth→Infrared expansion alignment device →two roll skew rolling mill (heavy duty )→Tension controller →Circular warping (active)→Infrared expansion alignment device →Lower feeding →Expanding roll→Electric weft →Upper overfeed→Four finger stripping →Infrared edge detection →Upper needle →heat setting chamber →Cold air cooling →Plaiting .
Machine Parameter：
Machine Mode | TPYD2800 |
Application | Open width fabric （70-400gsm）made of cotton ， Cotton/Polyester wool synthtic fiber and other blend fabric |
Stenter type | Hot air circulation |
Holding type | Pin+Clip |
Rial type | SS stainless steel |
Working speed | 0-100m/min |
Chamber length | 3000mm |
Chain type | Pitch 60mm Oil -free lubrication |
Chamber no | 2-10Chambers |
Insulating board thickness | 150mm |
Temperature of chamber | 100-220Degree |
Overfeeding rate | -20-40% |
Temperature | Adjustable separately |
Control power supply | 380V/50HZ /3Phase |
Machine weight | 40Ton |
Compressed Air | 0.3-0.6Mpa |
Steam consumption | 100-150Kg/h |
Standard configuration | Single padder /Schneider component /ABB motors/Touch screen/Inverter/Maxson gas burner |
Machine drawing ：
Hot Tags: hot air stenter machine, suppliers, manufacturers, factory, customized, price, cheap, for sale, company, cost, for sale
Send Inquiry
