Fabric Heat Setting Machine
Fabric heat setting machine is used for polyester fabrics,it adopts hot air setting,maximum working temperature is 220℃.it is used for heat setting of tubular polyester、blender cotton fabrics. After worked by this machine,customer can get steady size,flat surface.
Fabric Heat setting machine
Machine usage:
Fabric heat setting machine is used for polyester fabrics,it adopts hot air setting,maximum working temperature is 220℃.it is used for heat setting of tubular polyester、blender cotton fabrics. After worked by this machine,customer can get steady size,flat surface.
The machine has three heating mothod: electric,thermal oil,natural gas and liquefied gas,before order the machine,please inform.
The Heat Setting Machine is used for the pre-setting of Lycra / Elastene blends with cotton or synthetic fires before the wet processing of the gray fabric, as well as the Heat Setting of synthetic fabrics and blends, if finished in tubular form.
The Heat Setting machine is equipped with specially designed adjustable Stainless Steel Frames. Machine is equipped with Radial Blowers, one per section, a Natural Gas Burner or Thermionic Fluid Heater, Nozzle Systems for uniform distribution of the re-circulating hot air and a suitable duct. The maximum temperature can be achieved up to 220 degree C. The machine is suitable for One, Two or Three Tubes.
The Cooling Zone at exit is provided to bring fabric temperature close to ambient and a Plaiter is provided at the delivery.
The machine is equipped with a Control Panel with a VFD, Temperature Controller and other accessories.
Machine Parameters
Items | Parameters |
Standard working width | Single tube 500mm- 1600mm |
Hot air Max.temperature | 220℃ |
Machine main speed | 30m/min（speed adjusted by the Inverter ） |
Machine overfeeding rate | -50%—+50% |
Heating mothod | Electric: when raising the temperature: 132KW; when working70～90KW Thermal oil:when raising the temperature: 120000kcal/H; when working 60000kcal/H Natural gas:When raising temperature: 20M³/H； when working: 7～10M³/H LPG |
Drive method | Three section inverter |
Fabrics exit | Plaiting,rolling (optional) |
Motor power | 12.3kW |
Applicable compressed air pressure | 0.2—0.5MPa |
Machine size （LxWxH） | 6000×5030×2200mm |
Machine weight | About4T |
Our Company :
Hot Tags: fabric heat setting machine, suppliers, manufacturers, factory, customized, price, cheap, for sale, company, cost, for sale
Send Inquiry
